About This Manual - Kenwood TM-255A Product Manual

About this Manual

This document was created for the product having the following design specifications.
• TM-D710A/E, RC-D710, MCP-2A Version 3.10, 3rd party external GPS unit and Weather
Station.
• TM-D710A/E and RC-D710 with firmware version 2.00.
Software License Notice
• Users are required to obtain approval from Kenwood, in writing, prior to redistributing this
document on a personal web page or via packet communication.
• Users are prohibited from assigning, renting, leasing or reselling the document.
• Users are prohibited from revising, changing, translating, merging, de-compiling or reverse
engineering the software.
• Kenwood shall own all copyrights and other intellectual properties for the software and all
manuals and documents attached to the software. The user shall be allowed to use, not to
resell, the software by obtaining a license from Kenwood. While the media on which the
software is stored is possessed by the user, the ownership of the software itself shall be
reserved for Kenwood.
• Kenwood does not warrant that quality and functions described in this document comply with
each user's purpose of use of this document and, unless specifically described in this
document, Kenwood shall be free from any responsibility for any defects and indemnities for
any damages or losses. The selection and introduction of the document, as well as the results
therefrom, shall be solely a liability of the user.
Firmware Copyrights
The title to and ownership of copyrights for firmware embedded in Kenwood product memories are
reserved for Kenwood Corporation.
Any modifying, reverse engineering, copying, reproducing or disclosing on an Internet website of
the firmware is strictly prohibited without prior written consent of Kenwood Corporation.
Furthermore, any reselling, assigning or transferring of the firmware is also strictly prohibited
without embedding the firmware in Kenwood product memories.
Cover 2 TM-D710A/E