Quick Sync Indicator Codes - Dell PowerEdge R630 Owner's Manual

Quick Sync indicator codes

Figure 7. Quick Sync indicator codes
1. Quick Sync status indicator
Power indicator pattern
Slow blink
Solid
Blinks three times rapidly and then turns off
Blinks continuously when the mobile device
touches the antenna
Blinks rapidly five times and turns off for one
second when the activation button is pressed.
This pattern is repeated until the activation
button is pressed again.
Off
2. Quick Sync activation button
Condition
Quick Sync is waiting to be configured from iDRAC.
Quick Sync is ready to transfer.
Quick Sync feature is disabled from iDRAC.
Indicates data transfer activity.
Quick Sync hardware is not responding properly.
Reseat the bezel. the problem persists, see
help.
Indicates that the Quick Sync feature is turned off.
Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it
indicates that power is not delivered to the Quick
Sync bezel.
NOTE: For security purposes, Quick Sync turns
off after thirty seconds of in-activity after the
activation button is pressed. Once timed-out,
the user is expected to press the activation
button again to activate Quick Sync.
Getting
19