Installing The Control Panel-10 Hard-Drive System And 24 Hard-Drive System - Dell PowerEdge R630 Owner's Manual

Next steps
Figure 55. Removing and installing the control panel
1. control panel release latch
3. control panel cable connecting to system
board
5. screw
Installing the control panel–10 hard–drive system and 24 hard–drive system
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Keep the #1 Philips screwdriver ready.
Steps
1. Route the control panel cable through the chassis and connect the control panel cable to the
control panel.
2. Push the control panel into the chassis till it snaps into place.
2. cable securing clip
4. J_FP_USB connector cable
6. control panel
119