Set-Up And Predelivery Checklist; Installation Of The Parts Included In The Crate; Tightening Torque Of Each Part; Routing Of Wire, Cables, Etc - Yamaha YFM80WP Assembly Manual

NOTE:
Check the following items again when set up and predelivery service are completed.
A: Installation of the parts included in the crate
Handlebar

Handlebar cover

Front wheel
Rear wheel
Swingarm guard
Dummy headlights and front bumper
Front panel
B: Tightening torque of each part
Steering stem and handlebar holder
Front wheel and wheel hub
Rear wheel and rear axle
Front bumper and front fender
Front bumper and frame
Front panel and front fender
C: Routing of wire, cables, etc.
Fuel tank breather hose
Handlebar switch lead
Battery
D: Adjustments
Battery inspection
Tire pressure measurement
Fuel draining
Engine oil level inspection
Final gear oil level inspection
E: Function and performance
Check for the function of indicator light
Check for brake feeling
Check for engine noise (Yes/No)
Check for exhaust leak (Yes/No)
F: Accessories, etc. for delivery
Owner's manual
Owner's tool kit
YFM80WP

SET-UP AND PREDELIVERY CHECKLIST

–6–
Battery
Owner's manual
Seat
Front reflector
Rear reflector (for CDN)
Rear reflector (for EUR)
20Nm (2.0 m•kg, 14 ft•lb)
28Nm (2.8 m•kg, 20 ft•lb)
70Nm (7.0 m•kg, 51 ft•lb)
7Nm (0.7 m•kg, 5.1 ft•lb)
23Nm (2.3 m•kg, 17 ft•lb)
3Nm (0.3 m•kg, 2.2 ft•lb)
Battery negative lead
Battery positive lead
Idling speed adjustment
Throttle lever free play adjustment
Front brake adjustment
Rear brake adjustment