Changing The Display Contrast - Polycom Soundpoint IP 450 User Manual

The time and date appears on the screen of the SoundPoint IP 450 phone. If the phone
cannot obtain a time and date from the call server, the display will flash. Contact your
system administrator if either the time or date is incorrect. You can select from various
formats for the time and date display. Select and set options that are right for you. You
can also disable the time and date display, so the time and date do not di s play on the
phone screen.
To configure the time and date formats:
1. Press
2. Select Settings > Basic > Preferences > Time & Date.
3. Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.
4. Scroll through the options under each of these selections.
5. Press the Select soft key to confirm your choice.
the
6. Press to return to the idle screen.

Changing the Display Contrast

To adjust the contrast on the screen to a comfortable lev el:
1. Press
2. Select Settings > Basic > Contrast.
The following figure shows
Clock Time menu.
If multiple lines are configured on your phone, select the line to forwardfrom the
list using the arrow keys.
3. Scroll to select the forwarding type you want to change, and then pressthe
Select soft key. The options are:
— Always—To forward all incoming calls
— No Answer—To forward unanswered incoming calls
— Busy—To forward calls that arrive when you are already in a call
4. Depending on your selection:
a If you selected Always, enter a number to forward all future incoming
calls to.
b If you selected No Answer, enter a number to forward all unanswered
incoming calls to and how many rings to wait before forwarding (onering
is approximately six seconds). A value of 2 is recommended.
c If you selected Busy, enter a number to forward all future incomingcalls
to when you are already in another call.