Y70-70 Touch/Y70-80 Touch Hardware Maintenance Manual
1080 USB board
44
For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
Figure 8. Removal steps of USB board
Detach the connector in the direction shown by arrow 1, Remove the
screws 2.
Step
Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylok-coated (2)
2
USB PCB to LOGIC UP and KB SUP BKT
Remove the USB board in the direction shown by arrow 3.
Color
Torque
Black
2.0 kgf*cm