Y70-70 Touch/Y70-80 Touch Hardware Maintenance Manual
1060 LED board
42
For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
Figure 6. Removal steps of LED board
Detach the LED board connector in the directions shown by arrows 1 and 2.
Remove the screw 3. Then remove the LED board in the direction shown by
arrow 4.
Step
Screw (quantity)
M2.0 × 2.0 mm, flat-head, nylok-coated (1)
3
LED PCB to LOGIC UP SUB
Color
Torque
Black
1.5 kgf*cm