Y70-70 Touch/Y70-80 Touch Hardware Maintenance Manual
Figure 3. Removal steps of hard disk drive (continued)
Remove the hard disk drive 3.
Remove the screws 4 and detach the metal frame from the hard disk drive.
When installing: If a hard disk drive mylar label is present, do not reuse it. Use
the new hard disk drive mylar label included with the hard disk drive being installed.
38
Step
Screw (quantity)
M3 × 3 mm, flat-head, nylok-coated (4)
4
HDD bracket to HDD
Color
Torque
Sliver
2.5 kgf*cm