1050 Dimm - Lenovo Y70-70 Touch Hardware Maintenance Manual

Lenovo Y70-70 Touch/Y70-80 Touch

1050 DIMM

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
Figure 5. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
directions shown by arrows 1, and then unplug the DIMM in the direction
shown by arrow 2.
2
1 1
Note: I f only one DIMM is used on the computer you are servicing, the card must
be installed in SLOT-0 ( a : lower slot), but not in SLOT-1 ( b : upper slot).
b
a
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed
in the slot and is difficult to move.
41