1070 Subwoofer - Lenovo Y70-70 Touch Hardware Maintenance Manual

1070 Subwoofer

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
Figure 7. Removal steps of subwoofer
Unplug the subwoofer connector in the direction shown by arrow 1. Remove
the screws 2. Then remove the subwoofer in the direction shown by arrow 3.
Note: Be careful not to damage the connector.
Step Screw (quantity)
M2.0 × 2.0 mm, flat-head, nylok-coated (2)
2
SUB WOOFER to KB SUP BKT
When installing: Make sure that the connector is attached firmly.
Lenovo Y70-70 Touch/Y70-80 Touch
Color
Black
Torque
1.5 kgf*cm
43