How To Cancel A Destination From The Context Menu; How To Calculate The Distance, Bearing And Ttg (Time To Go) Between Two Points - Furuno GP-170 Operator's Manual

5. DESTINATION
5.2.3

How to cancel a destination from the context menu

Note: This procedure is not available for the destination set with a mark (excluding the
MOB mark).
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Use the cursorpad to place the cursor on a destination.
3. Press the
4. For a route line or a waypoint, select [1 Yes] then [GoTo/Cancel]. For a MOB
mark, select [1 GoTo/Cancel].
5.3 How to Calculate the Distance, Bearing and TTG
(Time To Go) Between Two Points
You can display the distance, bearing and time to go between two points.
1. Press the MENU/ESC key to open the main menu.
2. Select [1 Display] then [7 Manual Calculation].
3. Enter latitude and longitude for the starting and ending positions with the numeric
keys. To change the coordinate, select "N" or "E" then press one of keys from 0
to 9.
5-4
key to open the context menu.
On a route line
On a MOB mark
On a waypoint