Connecting Antennas - Kenwood KRF-V7300D Instruction Manual

Connecting antennas

The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.
L
R
PLAY IN PLAY IN REC OUT PLAY IN REC OUT
AUX CD MD/TAPE
ANTENNA
AM GND FM 75
+
‒
R L
RED WHITE
SPEAKER A
FRONT SPEAKERS (6 – 16 )
AM loop antenna AM loop antenna
1
Attach to the stand.
2
Push the lever.
3
Insert the antenna cord.
4
Release the lever.
28
KRF-V9300D/KRF-V8300D/KRF-V7300D
AUDIO
PLAY IN PLAY IN FRO
VIDEO1 VIDEO2
AM GND
R L
SPEAKER B
Twist the
conductors into
a single bundle
before connection.
Insert into the groove.
Insert until the metallic
conductor becomes invisible.
AM loop antenna
Install in a position as apart as possible from this unit, the TV monitor,
personal computer, speaker cords and power cord, and place in an
orientation that can offer the best reception condition.
アンテナ
FM 75
FM antenna adapter
(commercially available)
FM indoor antenna FM indoor antenna
1
Insert the antenna cord.
FM outdoor antenna FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna
into the room and connect it to the FM 75Ω terminal.
FM indoor antenna
Fix on a wall, etc. with a good reception condition.
The provided antenna is intended for temporary
use in indoors. To obtain stable FM reception, it
is recommended to use an outdoor antenna. Be
sure to disconnect the indoor antenna when an
outdoor antenna is installed.
FM outdoor antenna
(commercially available)