Connecting Video Components; Connecting Dvd 6-Channel Jack; Connecting The Antennas - Kenwood VR Series Instruction Manual

Video Inputs
(Yellow RCA
pin cord)
VIDEO IN
MuW-chsnnsI surround
procossor
DVD player or LD player
Audio inputs and outputs Video inputs and outputs
(Red and white RCA pin cords) (Yellow RCA pin cords)
Connecting DVD 6-channel jack
[ FRONT
subwoofer''1_
I CENTER
I^RROUND
I
VIDEO OUT
DVD player equipped wMi
aix channel outfwt Jacks, etc.
The sound Input to DVD 6CH. INPUT Is paired with the video
signal Input to 5CH. INPUT.
Connecting the antennas
AMIoopantentia
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver. TV set. speaker cords and power cord, and adjust the direction
for best reception.
FMMooraaltaiu
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor aatanna
Lead the 75£2 coaxial cable connected to the FM outdoor antenna into the
room and connect it to the PM 75n terminal.
r !
i
wm ^
1
Use an antenna
adaptor
(Commercially
available)