Preparation For Playing Music Or Movie; Turning On The Power; Setting The Speaker System; Selecting The Input Mode - Kenwood KRF-V7300D Instruction Manual

Preparation for playing music or movie

LISTEN MODE
SPEAKERS
A/B/OFF
RECEIVER ON

Turning on the power

Turning on the power
1
Turn the connected monitor and player component
ON.
2
Press [RECEIVER ON] (remote control unit) or [ ]
(main unit) to turn on the unit.

Setting the speaker system

Setting the speaker system
¶ Operation available only on the main unit of this unit.
Press [SPEAKERS A/B/OFF] to select the speaker
system(s) to be used.
The speaker system(s) to be used light up.
• Speaker system B cannot be selected when the input mode is
"6ch Input".
44
KRF-V9300D/KRF-V8300D/KRF-V7300D
INPUT SELECTOR
INPUT MODE
LISTEN MODE
Input source keys

Selecting the input mode

Selecting the input mode
¶ Operation available only on the main unit of this unit.
When playing a component connected to the digital input
terminal (CD(ASSIGNABLE), VIDEO2 or DVD) or the HDMI input
terminal (DVD IN or VIDEO2 IN), set the input mode to match the
type of the audio input.
1
Use [INPUT SELECTOR] to select "CD" (or "VIDEO 1"
or "AUX" which you assigned to CD(ASSIGNABLE)
terminal), "VIDEO2" or "DVD" input source.
2
Press [INPUT MODE] to select the input mode.
Each press switches the mode as follows.
When the HDMI input is disabled:
Display Setting
The digital and analog inputs are switched automatically according
to the input signal. When a digital input is detected, the decode
"Full Auto"
mode is also switched according to the signal type (PCM/Dolby
Digital/DTS).
The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of playback.
"Digital Manual"
The decode mode is also fixed according to the type of the signal
to be played.
The analog 6-channel input mode to be selected when playing the
"6ch Input"* 1 * 2
DVD player connected to the DVD/6CH IN terminal.
The input mode is fixed at analog.
2
"Analog"*
This is selected for playback of analog player components.
1
* "6ch Input" setting can be selected only when the input
selector is set to "DVD (6ch In)".
2
* This cannot be selected when in DTS play mode.
When the HDMI input is enabled:
(Input source is set to "DVD" or "VIDEO2" only)
Display Setting
The decode mode is switched automatically according to the digital
"Signal Auto"
signal type (PCM/Dolby Digital/DTS).
The decode mode is fixed according to the type of the digital signal
"Signal Manual"
to be played.
• The AUTO DETECT indicator lights when "Full Auto" or "Signal
Auto" is selected.
• If the audio is lost as a result of change in the input signal while
"Digital Manual" is selected, press [LISTEN MODE].