Listening To Music With Pure Audio Mode - Kenwood KRF-V7300D Instruction Manual

Listening to music with PURE AUDIO MODE

PURE AUDIO MODE turns the display and analog video circuitry
(other than HDMI) off to eliminate their effects on the audio
circuitry. This mode thereby makes it possible to enjoy audio with
higher quality and higher fidelity to the original sound.
1
Select the music source you want to listen to.
2
Start playback from the selected source.
3
Press [PURE AUDIO MODE].
When PURE AUDIO MODE is enabled, the listen mode is
selected automatically according to the input signal. (See
<Input signals and corresponding listen modes> W.)
"PURE AUDIO MODE" indicator lights up, the display will be
turned off, and no video signal is output to the TV monitor.
To cancel
Press [PURE AUDIO MODE].
PURE AUDIO MODE is also canceled when the [LISTEN
MODE] or [STRAIGHT DECODE] key is operated.
46
KRF-V9300D/KRF-V8300D/KRF-V7300D
PURE AUDIO MODE
PURE AUDIO MODE
No video signal to the TV monitor.
(Except the HDMI video signal)
"PURE AUDIO MODE"
indicator lights up.
The display is turned off.
• When the input mode is "6ch Input", the listen mode does not
change. (<Selecting the input mode> r)
• The video other than the HDMI input video cannot be monitored
when PURE AUDIO MODE is selected.
• KRF-V9300D only
The video from the VIDEO, S-VIDEO or COMPONENT VIDEO signal
input cannot be monitored even if it is converted for the HDMI
output.