Names And Functions Of Parts; Main Unit - Kenwood KRF-V6060D Instruction Manual

Names and functions of parts

Main unit

POWER
STANDBY STANDBY
ON/STANDBY ON/STANDBY
A SPEAKERS B
POWER
F L
ULL DIGITA
D E C O D I N G
-ON –OFF
PHONES
For VR-6050
PHONO
For KRF-V7060D and
KRF-V6060D (For the U.K. only)
1 POWER ON/OFF key
(For KRF-V7060D/V6060D)
Use to turn the main power ON/OFF.
2 ON/STANDBY
key
(For KRF-V7060D/V6060D)
Use to turn the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER ON/STANDBY
(For VR-6050)
Use to turn the power ON/STANDBY.
STANDBY indicator
3 A SPEAKERS B keys
Use to turn the A/B speakers ON/OFF.
4 LOUDNESS key
Use to switch the status of LOUDNESS.
5 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
6 Surround indicators
DSP indicator
Lights when the receiver is in the DSP mode.
SPEAKER EQ indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied
to the system to back up the memory. This is called standby mode.
Under the condition, the system can be turned ON by remote control
unit.
6 EN
Speaker MUTE CLIP
indicator indicator
indicators
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL
L C SW R
LFE
SL S SB SR
Speaker selection indicators
Input channel indicators
Output channel indicators
DSP DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ CSII
LOUDNESS SPEAKER EQ ACTIVE EQ DSP
DVD/6CH CD/DVD AUX TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
DTS indicator
*
Lights when the receiver is in the DTS mode.
CS II indicator
Lights when the receiver is in the CIRCLE
*
SURROUND II mode.
7 ACTIVE EQ key
Use to select ACTIVE EQ's setting.
8 DSP key
key Use to select any of the DSP mode.
9 STEREO key
*
Use to switch the listen mode to STEREO.
0 INPUT MODE key
¡
Use to switch between the full auto, digital
and analog inputs.
! DIMMER key
™
Use to select the REC MODE.
™
Use to adjust the brightness of the display.
@ VOLUME CONTROL knob
# MUTE key
ª
Use to temporarily mute the sound.
$ PHONES jack
™
Use for headphone listening.
% Input Selector keys
™
DVD/6CH, CD/DVD, AUX (for VR-6050/KRF-
V6060D) or PHONO [for KRF-V7060D and
KRF-V6060D (for the U.K. only)], TUNER,
ª
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
Use to select input sources.
Input mode
indicators
DTS DOLBY DIGITAL
AUTO DETECT
ANALOG 96kHzfs DSP MODE PRO LOGIC
Display
STEREO INPUT MODE DIMMER
SOUND TONE SETUP
BAND AUTO MEMORY
Connection at POWER ON/OFF key (for KRF-V7060D/V6060D)
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.
Listen mode
indicators
RDS indicators
STEREO RDS
PTY
LOUDNESS CSII
AUTO
MEMORY
STEREO
TUNED
Frequency display
Input display
Preset channel display
Surround mode display
DOWN
MUTE
MULTI CONTROL LISTEN MODE
AV AUX
S VIDEO
^ SOUND key
ª
Use to adjust the sound quality and the ambi-
ª
ence effects.
& BAND key
Use to select the broadcast band.
* AUTO key
™
Use to select the auto or manual tuning
ª
mode.
( TONE key
º
Use to switch the status of TONE control.
) MEMORY key
9
Use to store radio stations in the preset
memory and to start the Auto Memory (for
the U.K. only).
¡ SETUP key
£
Use to select the speakers' settings etc.
™ M M M M M / ? ? ? ? ? keys
¤
Use for selection adjustments during SOUND,
¡
SETUP and PRESET CHANNEL functions.
£ MULTI CONTROL knob
™
Use to control a variety of settings.
¢ LISTEN MODE knob
™
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
¡
jacks
§ AV AUX key
Use to switch the input to AV AUX.
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
VOLUME CONTROL
UP
VIDEO L-AUDIO-R
º
¢
¢
™
¢§
*
*
*
ª
^
^