Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jack. (See "Connecting video components".)
12
EN
COAXIAL
OPTICAL
CD/DVD
VIDEO
2
DVD/
6CH
DIGITAL IN
COAXIAL
DIGITAL OUT
(AUDIO)
RF digital
demodulator
(DEM-9991D)
(sold separately)
DOLBY DIGITAL RF
OUT (AUDIO)
Optical fiber
OPTICAL DIGITAL OUT (AUDIO)
cable
CD or DVD player
COAXIAL DIGITAL OUT (AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
PCM OUT
LD player
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
!
9