Kenwood KRF-V6060D Instruction Manual page 20

Preparing for surround sound
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
6
Select the display mode.
1 Press the M M M M M / ? ? ? ? ? keys or Joystick (2/3) to select the DISP
MODE.
2 Press the SETUP key for the following displays:
1 DISP SELECTOR
2 DISP LISTEN
3 Use the MULTI CONTROL knob or Joystick (5/∞) to select
the display mode.
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
4 Press the SETUP key again to accept the setting.
5 Use the M M M M M key or Joystick (3) to select EXIT.
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
6 Press the SETUP key to exit the SET UP mode.
20 EN
: Displays the current input selector.
: Displays the current listen mode.
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
1 Use the Input Selector keys to select the source of which the
input level you want to adjust.
• You can store a separate input level for each input source.
2 Press the SOUND and M M M M M / ? ? ? ? ? keys or Joystick (2/3) repeatedly
until the "INPUT" indication appears.
RDS
THX
RTY
Surround EX
AUTO
3 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
MEMO
STEREO
input level.
TUNED
L C SW
LFE
SL S SB
• The adjustment mode is displayed for approximately 8 seconds.
RDS
THX
RTY
Surround EX
• The input level may be adjusted to any one of three settings:
AUTO
MEMO
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
STEREO
TUNED
4 Press the SOUND key again to return to the input indication.
SP MUTE OPTICAL 6CH INPUT
A B CLIP CLIP CLIP
COAXIAL
L C SW R
LFE
SL S SB SR
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ. MATRIX
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE
R
SR
CINEM
AUTO DETECT
ACTIV
ANALOG 96kHzfs DSP M
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
RTY
Surround EX
PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED