Preparing For Surround Sound; Speaker Settings - Kenwood KRF-V6060D Instruction Manual

Kenwood instruction manual audio video surround receiver
Hide thumbs Also See for KRF-V6060D:
Table of Contents

Advertisement

Preparing for surround sound

Speaker settings

To enable you to obtain optimum enjoyment from the receiver's listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, and surround speakers) as described below.
POWER
ON/STANDBY
/
(VR-6050)
ON/STANDBY
(KRF-V7060D/V6060D)
POWER ON/OFF
(KRF-V7060D/V6060D)
SET UP
1
Turn on the power to this receiver by pressing the POWER
ON/STANDBY
(for VR-6050) or POWER ON/OFF and ON/
STANDBY
(KRF-V7060D/V6060D) or POWER
2
Press the SETUP key to enter the SET UP mode and press
M M M M M /? ? ? ? ? keys or Joystick ( 2 / 3 ) for the following displays.
1 SP SETUP
2 TEST TONE
3 SP DISTANCE
4 DISP MODE
5 EXIT
The flow of the SET UP is as follows:
SP SETUP
TEST TONE
Subwoofer
T. TONE
T. TONE
AUTO
MANUAL
Front
L
L
Center
C
Surround
C
R
SR
Surround
R
SB
Back
SL
SR
Surround
SW
Mix
SB
Subwoofer
SL
Re-mix
SW
3
Select a speaker system.
1 Select the SP SETUP and press the SETUP key again so
that the subwoofer setting indication "SUBW ON" appears.
SP
MUTE
OPTICAL 6CH INPUT
A B
CLIP
COAXIAL
ANALOG
L
C
SW
R
LFE
SL S
SB
SR
18
EN
SETUP
MULTI CONTROL
POWER
Joystick
(MULTI CONTROL 5 / ∞,
DOWN 2 / UP3)
key.
SP DISTANCE
DISP MODE
Front Left
Display Selector
Center
Display Listen
Front Right
Surround Right
Surround Back
Surround Left
Subwoofer
CINEMA EQ.
DTS.
DOLBY DIGITAL
STEREO
NEO:6
AUTO DETECT
ACTIVE EQ.
MATRIX
96kHzfs
DSP MODE
DISCRETE
PRO LOGIC
LOUDNESS
CSII
2 Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate subwoofer setting.
• The initial setting is "SUBW ON".
• When the setting "SUBW OFF" is selected, the front speakers
are automatically set to "FRNT LARGE" and the procedure skips
to step 6.
Before step 6, press the SETUP key to accept the setting.
• When subwoofer output sound is required, select "FRNT
NORMAL" or select both "FRNT LARGE" and "SW RE-MIX ON".
3 Press the M M M M M key or Joystick (3) to accept the setting.
• The front speakers setting indication "FRNT" appears.
L
C
LFE
SL S
SB
4 Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate front speakers setting.
• For "FRNT LARGE" selection, no sound will be heard from
subwoofer speaker even when it is set to ON. However, if you
select "SW RE-MIX ON" when subwoofer is selected, you will
be able to hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front
speaker.
5 Press the M M M M M key or Joystick (3) to accept the setting.
• The center speaker setting indication "CNTR" appears.
6 Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate center speaker setting.
If you selected "LARGE" as the front speakers setting,
EXIT
If you selected "NORMAL" as the front speakers setting,
7 Press the M M M M M key or Joystick (3) again to accept the setting.
• The surround speaker setting indication "SURR" appears.
8 Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate surround speaker setting.
If you selected "LARGE" as the center speaker setting,
RDS
THX
RTY
Surround EX
AUTO
MEMO
STEREO
TUNED
1 SUBW ON : Subwoofer setting mode to the receiver is
ON.
2 SUBW OFF : Subwoofer setting mode to the receiver is
OFF.
SP
MUTE
OPTICAL 6CH INPUT
CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B
CLIP
COAXIAL
ANALOG
96kHzfs
DSP MODE
SW
R
SR
1 FRNT LARGE
: Large front speakers are connected
to the receiver.
2 FRNT NORMAL
: Average size front speakers are con-
nected to the receiver.
1 CNTR LARGE
: A large center speaker is connected
to the receiver.
2 CNTR NORMAL : An average size center speaker is
connected to the receiver.
3 CNTR OFF
: Center speaker setting mode to the
receiver is OFF.
1 CNTR ON
: Center speaker setting mode to the re-
ceiver is ON.
2 CNTR OFF : Center speaker setting mode to the re-
ceiver is OFF.
1 SURR LARGE
: Large surround speakers are con-
nected to the receiver.
2 SURR NORMAL : Average size surround speakers are
connected to the receiver.
3 SURR OFF
: Surround speaker setting mode to
the receiver is OFF.
DTS.
DOLBY DIGITAL
STEREO
NEO:6
RDS
THX
MATRIX
RTY
Surround EX
DISCRETE
PRO LOGIC
LOUDNESS
CSII
AUTO
MEMO
STEREO
TUNED

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krf-v7060dVr-6050

Table of Contents