Precor PRECISIONSERIES Quick Start Card page 28

3. When the first setting (SAFETY CODE) appears,
press a key to continue.
If you want to ...
Change this setting
Leave this setting as it is The right arrow key
4. Use the left and right arrow keys to change the
setting, then press GO to save your changes.
5. Repeat the previous two steps for the remaining
settings.
Note: You can use the left arrow key to return to
previous settings if you want to change them, and
the list of settings loops from the end back to the
beginning.
6. When you have changed all of the settings you
want to change, press PAUSE to exit from the
setup menu.
The following table shows the effect that each setting
has and the changes you can make.
Setting Up Your Equipment
Then press ...
GO
Table 4. Console settings
Setting Effect
SAFETY CODE Requires users
to press a
sequence of
keys
(WORKOUTS,
ENTER, Left
arrow, Right
arrow) before
starting a
workout
SET UNIT OF Selects the
MEASURE system to use
when entering
or reporting
distances and
weights
Values Default
ENABLE or DISABLE
DISABLE
US US STAN-
STANDARD DARD
or METRIC
23