HP ProLiant ML310e User Manual page 50

Unlock the tower bezel (on page 17).
2.
Remove the access panel (on page 18).
3.
Remove the air baffle (on page 19).
4.
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board.
5.
Install the TPM security rivet by pressing the rivet firmly into the system board.
6.
Install the air baffle (on page 20).
7.
Install the access panel (on page 19).
8.
Lock the tower bezel.
9.
Connect each power cord to the server.
10.
Connect each power cord to the power source.
11.
Hardware options installation 50