Install the optical drive into the media drive bay
8.
Connect the drive cables:
9.
Connect the power cable to the drive.
a.
Connect one end of the SATA cable to the drive and the other end to the system board.
b.
For cable routing information, see "Optical drive cabling (on page 62)."
Install the access panel (on page 19).
10.
Install the tower bezel (on page 17).
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Power up the server (on page 16).
14.
Memory options
("Optical drive
cabling" on page 62).
Hardware options installation 41