Vivotek SD8333-E User Manual page 48

VIVOTEK
Electronic image stabilizer
Select the checkbox to enable the Electronic image stabilization (EIS) function.
Enable 3D Noise reduction
■ Check to enable noise reduction in order to reduce noises and flickers in image. This applies to the
onboard 3D Noise Reduction feature. Use the pull-down menu to adjust the reduction strength. Note
that applying this function to the video channel will consume system computing power.
3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light condition
with fast moving objects, trails of after-images may occur. You may then select a lower strength level
or disable the function.
Note that the Preview button has been cancelled, all changes made to image settings is directly shown
on screen. You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the setting. You can also click on Profile
to adjust all settings above in a pop-up window for special lighting conditions during a specific period of
time in a day.
Sensor Setting 2:
For customized situations such as
night mode.
Exposure
On this page, you can set the Exposure level, Max gain,Exposure mode, and IR cut filter related settings.
Detailed configurations will be automatically adjusted since the sensor library will automatically adjust the
value according to the ambient light.
Sensor Setting 1:
For normal situations
48 - User's Manual
Sensor Setting 2:
For special situations