Vivotek SD8333-E User Manual page 182

VIVOTEK
NAME VALUE
maxframerat A list of
e <Integer>
mpeg4_maxf A list of
ramerate <Integer> and
"‐"
182 - User's Manual
Default SECURITY
(get/set)
60,60,60,6 0/7
0
60,60,60,6 0/7
0
DESCRIPTION
this group.
Indicate frame rate that the video source outputs in
current video mode.
One to one mapping to the resolution in "resolution".
* The element number is defined as "nresolution" in
this group.
* This parameter may be changed when
"videoin_c<n>_cmosfreq"=50 or
"videoin_c<n>_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is changed to
50 fps, and so on.
Maximum fps that the device can encoded one
stream with MPEG4 on resolutions in current video
mode.
"‐" means not support.
* One to one mapping to the resolution in
"resolution".
* The element number is defined as "nresolution" in
this group.
* This parameter may be changed when
"videoin_c<n>_cmosfreq"=50 or
"videoin_c<n>_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is changed to
50 fps, and so on.
Codec: MPEG4
More details, see 5.6
* Only available when 'mpeg4' is listed in
"capability_videoin_codec".
.