Vivotek SD8333-E User Manual page 155

daynight
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME
updateinterval
daymodebegintime
daymodeendtime
sensitivity
7.10.1 Alternative IR cut control profiles
Group: ircutcontrol _profile
NAME
profilestatus
Group: ircutcontrol _profile_i<0~(m-1)>
NAME
mode
daymodebegintime
daymodeendtime
sensitivity
auto,schedule,da auto
y,night
VALUE DEFAULT
1~10 5
00:00~23:59 07:00
00:00~23:59 18:00
0~28 8
VALUE DEFAULT
<boolean> 0
(capability. nvideoinprofile > 0)
VALUE DEFAULT
auto, night
schedule,
day,
night
00:00~23:59 07:00
00:00~23:59 18:00
0~28 8
0: low
1: medium
2: high
4/4 auto => auto daynight
night => ircut filter on
day => ircut filter off
schedule => scheduled ircut filter
SECURITY DESCRIPTION
(get/set)
6/10 Update IR cut status interval
6/6 Day mode begin time
6/6 Day mod end time
6/6 Sensitivity of IR cut filter
SECURITY DESCRIPTION
(get/set)
6/6 Enable/disable this profile setting
SECURITY DESCRIPTION
(get/set)
6/6 Active mode of this profile
6/6 Day mode begin time
6/6 Day mod end time
6/6 Sensitivity of IR cut filter
VIVOTEK
User's Manual - 155