Vivotek SD8333-E User Manual page 139

7.6 network
Group: network
NAME VALUE
preproces <positive
s integer>
type lan,
pppoe
<product
dependent>
resetip <boolean>
ipaddress <ip
address>
subnet <ip
address>
router <ip
address>
DEFAULT SECURITY
(get/set)
<blank> 6/6
lan 6/6
1 6/6
<product 6/6
dependent>
<blank> 6/6
<blank> 6/6
DESCRIPTION
An 32-bit integer, each bit can be set separately as
follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming service;
To stop service before changing its port settings. It's
recommended to set this parameter when change a
service port to the port occupied by another service
currently. Otherwise, the service may fail.
Stopped service will auto-start after changing port
settings.
Ex:
Change HTTP port from 80 to 5556, and change RTP
port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
"/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=5556&
network_rtp_videoport=20480"
Network connection type.
1 => Get ipaddress, subnet, router, dns1, dns2 from
DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1,
and dns2.
IP address of server.
Subnet mask.
Default gateway.
VIVOTEK
User's Manual - 139