Vivotek SD8333-E User Manual page 135

daylight_enable
daylight_dstactualmode
daylight_auto_begintime
daylight_auto_endtime
daylight_timezones
updateinterval
restore
reset
restoreexceptnet
<boolean> 0
1~4 1
string[19] NONE
string[19] NONE
string ,-360,-320,
-280,-240,
-241,-200,
-201,-160,
-140,-120,
-80,-40,0,
40,41,80,
81,82,83,
120,140,
380,400,48
0
0, 0
3600,
86400,
604800,
2592000
0, N/A
<positive
integer>
0, N/A
<positive
integer>
0~ N/A
480: GMT 12:00 Aucklan, Wellington,
Fiji, Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Enable automatic daylight saving time
in time zone.
6/7 Check current status of is daylight
saving time.
(Used internally)
6/7 Display the current daylight saving
start time.
6/7 Display the current daylight saving
end time.
6/6 List time zone index which support
daylight saving time.
6/6 0 to Disable automatic time
adjustment, otherwise, it indicates
the seconds between NTP automatic
update intervals.
7/6 Restore the system parameters to
default values after <value> seconds.
7/6 Restart the server after <value>
seconds if <value> is non-negative.
7/6 Restore the system parameters to
default values except (ipaddress,
subnet, router, dns1, dns2, pppoe).
This command can cooperate with
other "restoreexceptXYZ" commands.
When cooperating with others, the
VIVOTEK
User's Manual - 135