Gas Conversion Kits - Superior SLDVT-40NM Installation Instructions Manual

GAS CONVERSION KITS

WARNING
This conversion kit shall be
installed by a qualified service
agency in accordance with the
manufacturer's instructions
and all applicable codes and
requirements of the authority
having jurisdiction. If the
information in these instruction
is not followed exactly, a fire,
explosion or production of carbon
monoxide may result causing
property damage, personal injury
or loss of life. The qualified
service agency is responsible
for the proper installation of
this kit. The installation is not
proper and complete until the
operation of the converted
appliance is checked as
specified in the manufacturer's
instructions supplied with the
kit.The qualified service agency
performing this installation
assumes responsibility for this
conversion.
AVERTISSEMENT
Cette trousse de conversion doit
être installée par un technicien
agréé, selon les instructions
du fabricant et selon toutes
les exigences et tous les
codes pertinents de l'autorité
compétente. Assurez-vous de
bien suivre les instructions dans
cette notice pour réduire au
minimum le risque d'incendie,
d'explosion ou la production de
monoxyde de carbone pouvant
causer des dommages matériels,
des blessures ou la mort. Le
tecnicien agréé est responsable
de l'installation de cette trousse.
L'installation n'est pas adéquate
ni complète tant que le bon
fonctionnement de l'appareil
converti n'a pas été vérifié selon
les instructions du fabricant
fournies avec la trousse. Le
fournisseur de service qualifié
ayant réalisé l'installation
assume les responsabilités liées
à la conversion.
36
SUPERIOR DIRECT-VENT GAS FIREPLACES • SLDVT-30/35/40/45 • INSTALLATION INSTRUCTIONS
In Canada:
THE CONVERSION SHALL BE CARRIED
OUT BY A MANUFACTURER'S
AUTHORIZED REPRESENTATIVE, IN
ACCORDANCE WITH THE REQUIREMENTS
OF THE MANUFACTURER, PROVINCIAL
OR TERRITORIAL AUTHORITIES HAVING
JURISDICTION AND IN ACCORDANCE
WITH THE REQUIREMENTS OF THE
CAN/CGA-B149.1 OR CAN/CGA-B149.2
INSTALLATION CODES.
La conversion devra être effectuée
conformément aux recommandations
des autorités provinciales ayant
juridiction et conformément aux
exigences du code d'installation CAN/
CSA-B149.1.
Gas conversion kits are available to adapt
your appliance from the use of one type of
gas to the use of another. These kits contain
all the necessary components needed to
complete the task including labeling that
must be affixed to ensure safe operation.
Kit part numbers are listed here and the
following steps detail the conversion
procedure. Refer to the instructions
provided with the conversion kit when
performing any gas conversion.
DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Table 30: Millivolt SIT Systems,
Natural Gas To Propane Gas
Conversion Kits
Model Catalog Number
SLDVT-30
SLDVT-35
SLDVT-40
SLDVT-45
Table 31: Millivolt SIT Systems,
Propane Gas to Natural Gas
Conversion Kits
Model Catalog Number
SLDVT-30
SLDVT-35
SLDVT-40
SLDVT-45
Table 32: Electronic SIT Systems,
Natural Gas To Propane Gas
Conversion Kits
Model Catalog Number
SLDVT30NE-2
SLDVT35NE-2
SLDVT40NE-2
SLDVT45NE-2
Table 33: Electronic SIT Systems,
Propane Gas To Natural Gas
Conversion Kits
Model Catalog Number
SLDVT30NE-2
SLDVT35NE-2
SLDVT40NE-2
SLDVT45NE-2
H6163
H7292
H6975
H7546
H6165
H7293
H7294
85L66
H8916
H8917
H8918
H8919
H8923
H8924
H8846
H8925