Front Block - Hitachi DZ-HS303A Service Manual

Disassembly and Reassembly > Disassembly

(6) Front Block

Caution
A fl ash unit is mounted in the DZ-HS303A/GX3300A front block. The fl ash unit generates high voltage:
Take shock-preventive measure, such as wearing gloves, etc., and take great care during work:
The fl ash unit maintains a high voltage even if the power supply (AC adapter/charger, battery, etc.) is
removed.
1) Remove the AVJ-H/L circuit board (c) from
MAN circuit board (b) in the direction of the
arrow.
2) Open the jack cover (d) and then remove the
four screws [A].
3) With DZ-HS303A/GX3300A, remove the
screw [G]
4) Remove the front block (a) in the direction of
the arrow.
(e)
(a) Front block
(b) MAN circuit board
(c) AVJ-H/M/L circuit board
(d) Jack cover
(e) FRT-H/M/L circuit board
(a)
Flash unit
2) [A]
2) [A]
(a)
3) [G]
[HS303A/
GX3300A]
2) [A]
(d)
Fig. 5-3-6
5 - 7
Front right side
1)
(c)
4)
2) [A]
2) [A]
3) [G]
[HS303A/GX3300A]
(b)
[A] M1.7×4
(Silver)
[G] M1.7×4
(Silver)