L Block - Hitachi DZ-HS303A Service Manual

Disassembly and Reassembly > Disassembly

(5) L Block

■DZ-HS303A/HS300A/GX3300A/GX3200A/BX37A/BX35A
1) Remove the six screws [A].
2) Open the jack cover (e) and then remove the
screw [G].
3) Open the L block in the direction of the arrow
from the rear side.
Take care at this time that the LMF-H/L
circuit board and two speaker cables between
the L and R blocks do not get disconnected.
4) Unplug the speaker cable connector (c).
5) Remove the LMF-H/L circuit board (d).
Caution during disassembly and reassembly:
Securely plug the connector (speaker cable
connector) into the LMF-H/L circuit board.
(a) L block
(b) R block
(c) Connector of speaker cables
(d) LMF-H/L circuit board
(e) Jack cover
2) [G]
(e)
Fig. 5-3-5A DZ-HS303A/HS300A/GX3300A/GX3200A/BX37A/BX35A
1) [A]
4)
(b)
(d)
5)
(d)
5 - 5
1) [A]
2) [G]
1) [A]
Detailed view of screw positions
[A] M1.7×4
(Silver)
[G] M1.7×4
(Silver)
1) [A]
1) [A]
(a)
(c)
1) [A]
3)