Icom IC-M423 Instruction Manual page 55

Manual Reply:
Enter "POSITION REPLY" in the DSC CALLS menu.
q
DSC Calls
➪
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
• If no Position Request call has been received, the "POSITION
REPLY" item will not be displayed.
Select a desired Position Request call to reply to, using
w
Dial or [Y]/[Z], then push Dial or [ENT].
The Position Reply call confirmation screen is displayed.
e
Push [CALL] to transmit the acknowledgement call.
Position Reply
➪
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.
When no GPS receiver is connected, and both position and
time have been manually programmed, the screen shown
below appears. Edit your latitude and longitude position and
UTC time as follows:
Push [CHG], then edit your latitude and longitude position
➥
and UTC time.
• Select a desired number using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• Select N (North latitude) or S (South latitude) when the cursor
is on the 'N' or 'S' position.
• Select W (West longitude) or E (East longitude) when the cur-
sor is on the 'W' or 'E' position.
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
46