Icom IC-M423 Instruction Manual page 42

7
DSC OPERATION
D Transmitting a Group call (continued)
About Manual Inputting:
Enter a desired group ID in the following way:
• Select a desired number using Dial, or [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• The first digit is specified as '0' for a Group ID.
• The first two digits are '0' for any Coast station ID.
A confirmation screen appears.
r
• Confirm the call contents.
33
Push [CALL] to transmit the Group call.
t
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Group call has been transmitted, the following
y
screen is displayed.
Announce the information using the microphone.
u
After the announcement, push [EXIT] to return to the nor-
i
mal operating mode.