Manual Setup; Speaker Setup - Denon AVR-4311 Owner's Manual

MANUAL SETUP

Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display
or other settings.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ ® XT 32, Dynamic EQ ® and Dynamic Volume ® (vpage 85, 86).
• Can be used without changing the settings. Please set if necessary.
Menu operation
1
ZONE SELECT
Press to switch the zone mode to
ZONE).
The M indicator lights.
2
Press AMP to set the remote control unit to AMP-operation
mode.
3
MENU
Press .
The menu is displayed on the TV screen.
4
Press ui to select the menu to be set or operated.
5
Press ENTER or p to enter the setting.
RETURN
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the "MANUAL SETUP" procedure
Speaker Setup (vpage 89) HDMI Setup (vpage 94)

SPEAKER SETUP

HDMI SETUP
Amp Assign RGB Range
Speaker Config. Vertical Stretch
Bass Setting Auto Lip Sync
Distance HDMI Audio Out
Channel Level Monitor Out
Crossover Freq. HDMI Control
Network Setup (vpage 97) Zone Setup (vpage 99)
Change assigned power amp settings to match Make settings for RGB output range
the speaker system configuration
NETWORK SETUP ZONE SETUP
Network Connecting ZONE2
Other ZONE3
Napster Account
Last.fm Account
Last.fm Display
Network Info
Language (vpage 102)
Make settings for wired LAN Make settings for audio playback in a ZONE 2
system
LANGUAGE
English
Deutsch
Français
Italiano
Español
Nederlands
Enter
Select the language displayed on the GUI screen
Remote control operation
buttons
(MAIN
M
.
Audio Setup (vpage 95)
AUDIO SETUP
Normal EXT.IN Setup Subwoofer Level
Enhanced 2ch Direct/Stereo
Auto Surround Mode
EQ Customize
Option Setup (vpage 100)
Setup playback method for analog signals
inputted from external input connectors (EXT.IN)
OPTION SETUP
OPTION
Bass Volume Control Volume Display
OPTION
Treble Source Delete Volume Limit
HPF GUI Power On Level
Lch Level Remote Preset Codes Mute Level
Rch Level Quick Select Name
Channel Zone Rename
Make settings for volume control
Move the cursor
(Up/Down/Left/Right)
Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ XT 32, Dynamic EQ and Dynamic Volume (vpage 85, 86).
• "MANUAL SETUP" can be used without changing the settings. Please set if necessary.
n Change power amp assignment to suit the speaker system confi guration
(Amp Assign)
Examples of Amp Assign menu screen displays
[1st page]
Set items referring to "Steps for setting "Amp Assign"" (vpage 90).
AMP ASSIGN
Assign Mode NORMAL
7.2 ch/9.2 ch
[2nd page]
• The signal being output by each speaker can change according to "Amp Assign" setting.
• The speaker terminals and the output from the pre-out terminals can be checked on this screen.
AMP ASSIGN [2/2]
q Assign Mode NORMAL
SPEAKERS
R L R L R L
FRONT CENTER SURROUND SURR.BACK
w
PRE OUT
FL C SL SBL
e L
R
ZONE2 ZONE3 FR SW1 SR SBR SW2
Return
RETURN
Check signal output from speaker/PREOUT connectors
Confi rm the setting
Default settings are underlined.
[1/2]
ZONE2: ZONE3:
Return
RETURN
q Current settings
w Signal being output from speaker
terminal
e Output from pre-out terminal
• Terminals not being used are greyed
R L R L
F.HEIGHT F.WIDE
out.
FHL FWL
See also page 5, 6, 52 – 58 for how to
connect the speakers.
FHR FWR
Return to previous menu
ENGLISH
89