Connecting A Cd Player; Component Equipped With A Denon Link Connector; Component With Multi-Channel Output Connectors - Denon AVR-4311 Owner's Manual

ENGLISH

Connecting a CD player

• You can enjoy CD sound.
• Select the connector to use and connect the device.
Cables used for connections
Audio cable (sold separately)
(White) L
Audio cable
(Red)
R
CD player
AUDIO
AUDIO
OUT
L R
L R
L R
in Set as Necessary
Set this to change the digital input connector to which the input
source is assigned.
"Input Assign" (vpage 77)
24
Component equipped with a DENON
LINK connector
Multichannel playback is possible. That includes DVD-Audio and Super
Audio CD (vpage 30 "Playing an iPod®").
Also, refer to page 29 "Playing a Blu-ray Disc player compatible with
DENON LINK 4th" for information on connecting a player that supports
DENON LINK 4th edition.
L
Cables used for connections
R
Audio cable (sold separately)
DENON LINK
cable
Blu-ray Disc player /
DVD player
AUDIO
DENON LINK
in Set as Necessary
When connecting by use of DENON LINK, set "Digital" to
"D.LINK".
"Input Assign" (vpage 77)
Component with Multi-channel
Output connectors
• You can connect this unit to an external device fitted with multi-
channel sound audio output jacks to enjoy music and video.
• The video signal can be connected in the same way as a Blu-ray Disc
player / DVD player (vpage 18 "Connecting a Blu-ray Disc player").
Cables used for connections
Audio cable (sold separately)
(White)
L
Audio cable
(Red)
R
Audio cable
Blu-ray Disc player / DVD player
AUDIO
SUB- FRONT CENTER SURROUND SURROUND
WOOFER BACK
L R L R L
L R L R L
L R L R L
in Set as Necessary
To play analog signals input from the external input (EXT. IN)
terminal, set "Input Mode" (vpage 80) to "EXT. IN".
L
R
R
R
R