Manual Setup; Speaker Setup - Denon AVR-1611 Owner's Manual

ENGLISH

Manual Setup

Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display
or other settings.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ ® , Dynamic EQ ® and Dynamic Volume™ (vpage 45, 46).
• Can be used without changing the settings. Please set if necessary.
Menu operation
1
Press AMP to set the remote control unit to amplifier operation
mode.
2
MENU
Press .
The menu is displayed on the TV screen.
3
Press ui to select the menu to be set or operated.
4
ENTER
Press to enter the setting.
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the Manual Setup procedure
Speaker Setup (vpage 48)

4-1.Speaker Setup

4-2.HDMI Setup
1.Pre Assign Auto Lipsync
2.Speaker Config. HDMI Audio Out : Amp
3.Bass Setting HDMI Control
4.Distance
5.Channel Level
6.Crossover Freq.
[ENT]:Select [RTN]:Back
Option Setup (vpage 51)
4-4.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
4.Remote Preset Codes
5.Quick Select Name
6.Display
7.Setup Lock
[ENT]:Select [RTN]:Back
48
Remote control operation
buttons
RETURN
.
HDMI Setup (vpage 50) Audio Setup (vpage 51)
4-3.Audio Setup
: ON 1.Auto Surround Mode
2.EQ Customize
: OFF
[RTN]:Back [ENT]:Select [RTN]:Back
Move the cursor
(Up/Down/Left/Right)
Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ, Dynamic EQ and Dynamic Volume (vpage 45, 46).
• Manual Setup can be used without changing the settings. Please set if necessary.
Setting items
Normal : Set for connecting the surround Back speakers to the SURR.
Pre Assign
Set the speakers connected BACK/FRONT HEIGHT connector in PRE OUT.
to this unit. Front Height : Set for connecting the front height speakers to the SURR.
BACK/FRONT HEIGHT connector in PRE OUT.
A power amplifier (sold separately) is required for this connection.
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "Surround
"Large" or "Small" speaker.
Back" and "Front Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover
• Large : Use a large speaker that can adequately play back low
Frequency" (vpage 50) as
frequencies.
the standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Confirm the setting
Default settings are underlined.
Setting details
Return to previous menu