Manual Setup; Hdmi Setup; Hdmi Control - Denon AVR-4308 Owner's Manual

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<Illustration : AVR-4308>
STANDARD <STATUS> ROOM EQ
<p>
[ AMP]
STANDARD
ROOM EQ
[PARA]
BUTTON

Manual Setup

<BUTTON>
[BUTTON]
Make detail settings for various parameters.

HDMI Setup

Make settings for HDMI video/audio output.
F Menu tree F
Manual Setup
HDMI Setup
a HDMI Control
a HDMI Control
Make settings for HDMI control function.
Control
Set HDMI control function ON/OFF.
[Selectable items] ON
NOTE
If you set "Control" to "ON" , the "HDMI" and "Digital" assignment
in "Source Select" – "Assign" (vpage 6, 7) under the GUI menu
changes.
Control Monitor (AVR-4308 only)
Select the interlocking monitor with the HDMI control.
[Selectable items] Monitor1
This can be set when "Control" is set to "ON".
Power Off Control
Interlock power OFF with HDMI control.
[Selectable items]
• This can be set when "Control" is set to "ON".
• Please consult the operating instructions for each connected device
to check the settings.
NOTE
• When the "Control" setting has been changed, always turn off the
power to the connecting devices afterwards and then turn back on.
• The HDMI control function does not work when the power to the
equipment is off.
• For details, see "HDMI Control Function" (vpage 11).
OFF
Monitor2
ENGLISH
ON OFF
5