Boot Up Floppy Seek; Boot Up Numlock Status; Gate A20 Option; Typematic Rate Setting - MSI 694D PRO Manual

Boot Up Floppy Seek

During POST, BIOS will determine if the floppy disk drive installed is
40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80
tracks.

Boot Up NumLock Status

The default value is On.
On (default) Keypad is numeric keys.
Off

Gate A20 Option

Normal
Fast

Typematic Rate Setting

Key strokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be selected.
The settings are: Enabled/Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you
hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to
repeat the keystroke The settings are: 250, 500, 750, 1000.
Keypad is arrow keys.
The A20 signal is controlled by keyboard
controller or chipset hardware.
The A20 signal is controlled by port 92 or
chipset specific method.
3-10
®