Description of the item on screen follows:
1st Boot Device/2nd Boot Device/3rd Boot Device/4th Boot
Device
This option sets the sequence of boot drives.
The settings are:
IDE0
IDE1
IDE2
IDE3
Floppy
ARMD-FDD
ARMD-HDD
SCSI
Network
CD-ROM
Disable
Boot Num-Lock
When this option is set to Off, AMI
key when the system is powered on. The end user can then use the arrow
keys on both the numeric keypad and the keyboard. The settings are On or
Off. The optimal default and Fail-Safe default settings are On.
Floppy Drive Swap
Set this option to Enabled to specify that flopppy drives A: and B:
are swapped. The settings are Enabled and Disabled. The Optimal and Fail-
Safe default setting is Disabled.
Floppy Drive Seek
When this option is set to Enabled, AMI
mouse. The settings are Enabled and Disabled. The Optimal and Fail-Safe
default setting is Enabled.
The system will boot from the first HDD.
The system will boot from the Second HDD.
The system will boot from the Third HDD.
The system will boot from the Fourth HDD.
The system will boot from Floppy drive.
The system will boot from IOMEGA drive.
The systm will boot from LS-120 drive.
The system will boot from the SCSI.
The system will boot from the Network drive.
The system will boot from the CD-ROM.
Disable this sequence.
®
3-6
®
BIOS turns off the Num Lock
®
BIOS supports a PS/2
®