•
SkiChrono with a fixed slope angle
Suunto S6 remembers the previous slope angle that you locked with Start . It is
shown on reversed background.
You need the fixed slope angle when you want to use the previously measured
slope angle for your next run.
•
Normal Chrono: 0.00,0
This is a stopwatch that you can use for timing events without using the speed
and slope angle measurement.
Bottom row after activating the SkiChrono/Chrono function
•
In the SkiChrono mode, it displays the real-time average speed from the start of the
run. It is based on the slope angle measured before the activation and on the
vertical speed measured with the altimeter.
•
In the Chrono mode, it displays the time of the current lap, i.e. the time from the point
when the previous split/lap time was saved. To save a split/lap time, go to Chrono
and press Start . When you save a split/lap, the time freezes for 3 seconds and
then continues.
Bottom Row after stopping the SkiChrono/Chrono function
•
In the SkiChrono mode it displays the average and the top speed recorded during
the run.
•
In the Chrono mode it displays the last Lap time.
NOTE: To change between SkiChrono and Chrono with a short press of Stop/CL,
you first need to reset the previous timing with a long press of Stop/CL.
50