Control When The Start Key Is Pressed - Konica Minolta bizhub C35 Service Manual

DRAFT
7. SCANNER SECTION
7.3.2

Control when the Start key is pressed

A. Original scanning mode
(1) Original cover mode
1. The scanner unit is moved to the scanner home sensor detection position and then
to the home position.
2. The scanner unit starts reading the original from the image trailing edge position.
3. After completing reading, the scanner unit is moved to the scanner home sensor
detection position.
4. The scanner unit is moved again to detect the home position.
Scanner home sensor detection position
[1]
[2]
[3]
[4]
(2) DF mode
• The original fed by the document feeder will be read at the original DF glass for. The
scanner unit will move to the reading position and stops.
Reading position
16
Home position
Home position detection
Scanner unit operation
Theory of operation Ver. 1.0 Feb. 2010
Scanner unit stop position
Image trailing edge position
Scan
Original cover reading position
A0VDT2C601AA
A0VDT2C602AA