Document Transport Mechanism; Document Exit Mechanism - Konica Minolta bizhub C35 Service Manual

DRAFT
27. AUTOMATIC DOCUMENT FEEDER SECTION
27.3.3

Document transport mechanism

• The transport roller turns to transport the original that has been taken up onto the docu-
ment scanning position of the printer.
• The transport motor drives the registration
• When the original reaches the document scanning position, the registration sensor
mounted on the relay board/1 is unblocked, which causes the main body to determine
that there is an original
Registration
roll
27.3.4

Document exit mechanism

• The original fed off by the transport roller is fed out into the document exit tray by the exit
switch back roller.
• The transport motor turns the exit roller through a gear train.
transport
104
roller
Registration
Relay board/1
roller
Theory of operation Ver. 1.0 Feb. 2010
through a gear train.
Transport motor (M100)
roller
Relay board/2
Transport motor (M100)
Exit switch back roller
Exit roll
A0VDT2C576AA
A0VDT2C575AA