Omron E5EC Datasheet page 13

E5EC/E5AC
E5AC
Mounted Separately
+0.8
92
0
120 min.
28
96 x 96
Waterproof
Packing (Accessory)
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.
Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure.
Note: Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller.
Group Mounted *
+1.0
(96 × number of units − 3.5)
0
Group mounting does not
allow waterproofing.
+0.8
92
0
(64)
4
60
1
110
Mounting Adapter
(Accessory)
• Recommended panel thickness is 1 to 8 mm.
• Group mounting is not possible in the vertical direction. (Maintain the
specified mounting space between Controllers.)
• To mount the Controller so that it is waterproof, insert the waterproof
packing onto the Controller.
+0.8
92
• When two or more Controllers are mounted, make sure that the
0
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
• To attach the USB-Serial Conversion Cable to the control panel, use a
panel thickness of 1 to 2.5 mm.
91 x 91
91