Omron E5EC Datasheet page 12

Dimensions
Controllers
E5EC
Mounted Separately
+0.6
45
120 min.
• Recommended panel thickness is 1 to 8 mm.
• Group mounting is not possible in the vertical direction. (Maintain the
specified mounting space between Controllers.)
• To mount the Controller so that it is waterproof, insert the waterproof
packing onto the Controller.
• When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
• To attach the USB-Serial Conversion Cable to the control panel, use a
panel thickness of 1 to 2.5 mm.
4
48
1
96
Waterproof
Packing (Accessory) Mounting Adapter
(Accessory)
Group Mounted *
+1.0
(48 × number of units − 2.5)
0
0
+0.8
92
0
Group mounting does not
allow waterproofing.
-0.8
92
0
(64)
60
44
110
* Selections for Control Outputs 1 and 2: QQ, QR, RR, CC, PR, or CQ
If you also specify 011, 013, or 014 for the option selection and use
group mounting, the ambient temperature must be 45°C or less.
If the ambient temperature is 55°C, maintain the following mounting
spaces between Controllers.
-0.6
45
0
120 min.
E5EC/E5AC
The Setup Tool port is on the top of the Tem-
perature Controller.
It is used to connect the Temperature Con-
troller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion
Cable is required to make the connection.
91
Refer to the instructions that are provided
with the USB-Serial Conversion Cable for the
connection procedure.
Note: Do not leave the USB-Serial
Conversion Cable connected when
you use the Temperature Controller.
60 min.
+0.8
92
0
(Unit: mm)
27