Sata Or Sas Ids - HP ProLiant DL580 Generation 3 User Manual

Activity Online
LED (1) LED (2)
Off Off

SATA or SAS IDs

When adding SAS hard drives to the server, observe the following general
guidelines:
•
The server supports eight SAS or SATA hot-plug hard drives.
•
The system automatically sets all drive numbers.
•
If only one hard drive is used, install it in the bay with the lowest number.
•
Hard drives must be SFF types.
•
Drives must be the same capacity to provide the greatest storage space
efficiency when drives are grouped together into the same drive array.
Fault LED Interpretation
(3)
Off Either (1) the drive is not configured as part of an array; (2) the drive
is configured as part of an array, but it is a replacement drive that is
not being accessed or being rebuilt yet; or (3) the drive is configured
as an online spare.
If the drive is connected to an array controller, you may replace the
drive online.
NOTE: The server may look different from that shown.
Server component identification 29