Traffic Information (Type 2/ 3 Models); Search By Program Type (Type 2/ 3 Models) - Kenwood DNX5360 Instruction Manual

Radio Listening

Traffic Information (Type 2/ 3 models)

When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
1 Display the Source
See <Source Control Screen> (page 32).
2 Set the Traffic information mode
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
⁄
• It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
• During the reception of traffic information the adjusted
volume is automatically remembered, so that the next
time it switches to traffic information the volume level is
that from the previously adjusted and remembered level.
36 DNX5360/DNX5360M/DDX5036/DDX5036M
Control Screen
Search by Program Type
(Type 2/ 3 models)
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1 Display the Source
See <Source Control Screen> (page 32).
2 Enter Program Type Search mode
3 Select a Program Type
1 1 1
1 Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
4 Search a station of the selected Program
Type
Control Screen