Zone Control - Kenwood DNX5360 Instruction Manual

Audio Control

Zone Control

You can set the front and rear audio source.
1 Display the Zone Control screen
>
Touch [ ]
2 Set the Zone Control
[Single Zone] Sets the unit to single zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
• There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 57) and <Speaker Setup>
(page 72) are not available.
58 DNX5360/DNX5360M/DDX5036/DDX5036M
>
[ ] [Zone Control]. (page 56)