Bluetooth Audio Control; Before Use; Source Control Screen - Kenwood DNX5360 Instruction Manual

Bluetooth Audio Control

You can listen to audio files stored in Bluetooth audio player and cell-phone.
It is necessary to connect the optional Bluetooth unit KCA-BT200.
• You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction
manual of the Bluetooth Unit as well.

Before Use

• You need to register your audio player and cell-phone
before using it with this unit. For more details, see
<Registering Bluetooth Unit> (page 67).
• If you have registered two or more audio players or cell-
phones, you need to select one of them. For more details,
see <Bluetooth Unit Connection> (page 69).
• Sound Output speaker can be set. See <Bluetooth
Hands-Free/Audio Output Setup> (page 69).

Source Control Screen

Switches to control screen to use various
functions.
1 Display the Source
See <How to Display the Source Control
Screen> (page 14).
2 Operation on the Source Control Screen
[3] Plays.
[7] Stops playing.
[8] Pauses.
[4], [¢] Selects a file.
⁄
• If the Bluetooth Audio player does not support AVRCP
profile, buttons are not displayed. Operate from the
Audio player.
Control Screen
English 41