Ccd Module Assembly Service Check - Lexmark X83 Service Manual

4403-XXX

CCD Module Assembly Service Check

The CCD (charged coupled device) Module does not move during
POST Test.
The CCD lamp does not come on when CCD module assembly
moves and the Photo, Normal, Quick lights stay on.
The CCD LCD displays "Unlock Scanner."
FRU
1 CCD Module Assembly
2-8
Service Manual
Action
If CCD module will not move, go to
the "Gear Train Assembly Service
Check" on page
If lamp does not come on as CCD
module assembly is scanning or
moving, check connector (JP3) on
the system board. If connected and
the lamp still does not work, replace
the CCD module assembly. If the
lamp does not correct the problem
after the CCD replacement, replace
the system board. Go to
Board Removal" on page 4-12
more information.
To unlock scanner, press the red
lever down. The lever is located by
the USB plug on the rear of the
machine.
Note: Unlock scanner before use.
2-9.
"System
for