Ccd Module Assembly Service Check - Lexmark X6170 4408-K01 Service Manual

4408-XXX

CCD Module Assembly service check

The CCD (charge-coupled device) Module does not move during
POST Test.
The CCD lamp does not come on when CCD module assembly
moves.
The CCD LCD displays "Unlock Scanner."
FRU
1 CCD Module Assembly
2-8
Service Manual
Action
If CCD module does not move, go to
the "Maintenance Station service
check" on page
If lamp does not come on as CCD
module assembly is scanning or
moving, check connector (JP9) on
the system board. If connected and
the lamp still does not work, replace
the control panel scanner assembly.
If the problem persists, replace the
system board. Go to
removal" on page 4-15
information.
To unlock scanner, press the red
lever down.
Note: Unlock scanner before use.
2-9.
"System board
for more