Table of Contents
Advertisement
MS-7033 M-ATX Mainboard
3. DSP Mode: Disabled
This part provides an advanced, amazing and considerate feature-dynami-
cally adjustable multi-channel sound system no matter what listening appliance you
are using and what application you are running.
The default setting for DSP Mode is off, in which the speaker icon
next to the DSP Mode
SHIFTER
Here you can test each connected speaker by clicking
ensure if each channel audio operation works properly. If any speaker fails to make
sound, then check whether the cable is inserted firmly to the connector or replace
the bad speakers with good ones.
Select the speaker by clicking it to test its functionality. The one you select will
light up and make testing sound.
5 - 6
button remains gray.
a n d t h e 7 . 1 V i r t u a l S P E A K E R
button to
Advertisement
Table of Contents
